Nylon 6 chips are obtained by hydrolytic polymerization of Caprolactam in the presence of Dicarboxylic acids as a chain regulator. This results in subsequent processing of the polymer melting into a chip form. Later, low molecular weight portions are extracted from the chip with water and subsequent drying.
| Type | Luster | Relative Viscosity(RV) | Grade | Application |
|---|---|---|---|---|
| TEXTILE SPINNING | Bright | 2.45, 2.70, 3.35 | Virgin(AA) | Textile spining / Nylon 6 yarn production |
| Semi Dull | 2.45 | Virgin(AA) | ||
| Full Dull | 2.45 | Virgin(AA) | ||
| ENGINEERING PLASTICS | Bright | 2.45, 2.70, 3.35, 4.00, 4.50 | Virgin (AA), Off grade | Monofilament, Multifilament, Extrustion, CF, Compounding, Inection Molding, Tyre cord, Plastic film,, Engineering plastic, Autmobile applications,Nylon sheets, Nylon Rods, Bristles,Fishing net aplications, Electronic equipment,Industrial applications, High tenacity products |
| Semi Dull | 2.45 | Off grade | ||
| Full Dull | 2.45 | Off grade | ||
| Reprocessed Bright | 2.6 | Reprocessed | ||
| Reprocessed Milky | 2.55 | Reprocessed |
| SR NO. | Relative Viscosity(RV) | Characteristics | GRADE |
|---|---|---|---|
| 1 | 2.65±0.05 | Medium Viscosity Compounding feedstock | For compounding application |
| 2 | 2.40±0.05 | High Flow Compounding feedstock | For compounding application |
| 3 | 2.60±-0.05 | General Injection Medium Viscosity With Externally Lubricated | For injection molding application (kitchenware, Washer, Glasses, Frame, Switch ) |
| 4 | 2.55±0.05 | Fast Cycle With Internally and Externally Lubricated | For injection molding application (cable tie,connecter, electric part) |
| 5 | 2.70±0.05 | Spinning grade | For Spinning (Nylon tow, other spinning applications) |
| 6 | 3.40 | Monofilament, Extrusion | |
| 7 | PA 66 Special Products | FR, Glass filled, Mineral filled etc available | |
| SR NO. | POLYMER | APPLICATION |
|---|---|---|
| 1 | NYLON 6 .10 | Basic raw material for high-quality monofilament production as: |
| – PMC (Paper machine cloths), fishing lines, filters, abrasives, brushes, etc. | ||
| – Plastic compounds for automotive, electrics/electronics, medical industry and industrial consumer goods. | ||
| 2 | NYLON 6.12 | Tubes for liquids, fibres for toothbrushes and precision seals. |
| SR NO. | POLYMER | Speciality |
|---|---|---|
| 1 | NYLON 6 chips (PA 6 CHIPS) | Unfilled grades, |
| Glass filled/Reinforced Grades, | ||
| Impact Modified/Super Tough Grades, | ||
| Flame Retardant Grades, | ||
| 2 | NYLON 66 chips (PA 66 CHIPS) | Mineral filled |